https://layerflow3d.com/changelog/ Every LayerFlow3D release and what it changed, in the words customers were given at the time. https://layerflow3d.com/changelog/#v1.71.2 layerflow3d-release-1.71.2 Sat, 19 Sep 2026 00:00:00 GMT The workspace has a new look, and you choose it. Under Workspace and then your account settings there are now two palettes. Monokai is the new one and it is on by default: darker surfaces, one accent colour, and figures set in a typeface where digits line up under each other. Classic is the palette the app has always had, and you can stay on it. Each palette comes as a pair, so light and dark both look right whichever one you pick. The dashboard was rebuilt around it. Every figure at the top now says what it is worth reading against: how many orders have been waiting too long, how many machines are actually printing, what the pile ready to ship is worth, how many jobs an ordinary day closes, how much is still owed and how many spools the shelf holds. The order queue says what each job is, for whom and for how much, instead of how heavy it is. The price calculator draws where the price goes, a colour per kind of cost, and what is left over is your profit. The menu folds to a narrow rail of icons and opens again whenever you want it, and it remembers which you chose. Along the foot of the window there is a new line with the state of the connection, how many machines you have and how many are online, the queue depth and the version you are running. Spacing, card edges and dividers are the same everywhere now, on every page. https://layerflow3d.com/changelog/#v1.70.0 layerflow3d-release-1.70.0 Fri, 18 Sep 2026 00:00:00 GMT Accounts with view only access no longer meet the dashboard with error messages about pages they were never allowed to open. Signing in as somebody else on the same page, without reloading it, now loads that person's own printers and orders instead of leaving the workspace empty. Integrations we have not yet run against the real service are marked as beta on the integrations page, so you know which ones are still being proven. The front page now says who builds LayerFlow3D. https://layerflow3d.com/changelog/#v1.67.1 layerflow3d-release-1.67.1 Fri, 18 Sep 2026 00:00:00 GMT The order board opens faster. It now carries only what the cards actually show, and moving a card between columns no longer makes every open tab reload the board, the history and the archive. Signing in is lighter as well: the filament colour catalogue is fetched by the screens that use it instead of arriving with every session. The pricing page no longer says that payments are unavailable. They are, and the page now says what each plan costs and what you get. The plans are one table now, so what each one gives you can be read across in a line: printers, seats, orders a month, workspaces, then every feature against all four plans. On a phone each plan is a short card again. The build number no longer spills out of the collapsed sidebar, and on a phone the consent bar no longer covers the figures at the top of the site. For a workshop running the telemetry agent on a large farm: a full report from every machine is accepted again after the agent restarts. https://layerflow3d.com/changelog/#v1.66.3 layerflow3d-release-1.66.3 Thu, 17 Sep 2026 00:00:00 GMT The order queue opens roughly three times faster. On a phone it used to lock up for about a second and a half every time you opened it, whether or not you had been there a minute earlier. It now draws in well under a second, and the screen answers your taps while it does. Three things changed to get there. The queue asks the server for what a card actually shows instead of everything an order has ever carried. A long column draws its first twenty five cards and offers the rest under a button that says how many are waiting: nothing has left the board, and the number beside the column name is still the real one. And the board stopped re-measuring itself every time you scrolled. Other pages ask for less on the way in as well, so moving between them is quicker. Opening a machine from a link now shows the page filling in rather than an empty screen. The whole app also downloads noticeably less than it did, which is worth most on mobile data and on a slow connection. https://layerflow3d.com/changelog/#v1.66.0 layerflow3d-release-1.66.0 Thu, 17 Sep 2026 00:00:00 GMT Adding a photo from a phone works again. The app now reads the picture before sending it, so a photo chosen from an iPhone gallery uploads instead of failing with nothing to go on. When the phone will not hand over the file at all, the app refuses it and says why. In the price calculator a field opens with its value selected, so a new number can be typed straight away without clearing the old one first. https://layerflow3d.com/changelog/#v1.65.3 layerflow3d-release-1.65.3 Thu, 17 Sep 2026 00:00:00 GMT Picking a photo on an iPhone now says what went wrong when it does. Where the phone is set to share only the photos you select, it sometimes hands the page a file with nothing in it; that used to end as "the photo could not be uploaded" and nothing more. The app now tells you that the phone did not hand the photo over, and what to do about it, before anything is sent. The same check stands behind a printer photo, a shop logo and a product photograph. https://layerflow3d.com/changelog/#v1.65.2 layerflow3d-release-1.65.2 Thu, 17 Sep 2026 00:00:00 GMT A change saved in a product card now shows in the storefront list straight away. The price, the shelf label and everything else the row says follow the save instead of waiting for the page to be reloaded, and a shop editing from a phone sees the same card update in a tab left open on the desk. The block that builds a picture of an item now says what it is for. It makes a picture for a post or a story: the shop page itself does not change from it. The shape, the colour and what the picture says are kept with the card, so a shop sets them once instead of choosing them again every time it opens the item. https://layerflow3d.com/changelog/#v1.65.1 layerflow3d-release-1.65.1 Wed, 16 Sep 2026 00:00:00 GMT You can now ask for a referral code and share a link with it. When a shop signs up through your link and finishes its first order, 25 paid orders are added to your workspace. They are spent only after the orders your plan already allows each month, so they are extra rather than instead. When paid plans open, anyone who arrives through your link will take 10 percent off Base and Pro, or 15 percent off Ultimate, for their first twelve months, and you will be credited with the value of one month of the plan they chose. Ask for a code on the new Referrals tab in your workspace settings. We look at every request ourselves and write to you with your link. The same tab then shows how many people opened it, how many signed up, how far each of them has got and what it has earned you. The shop settings now keep every switch you save. Cash on delivery for Nova Poshta stays on, a connected carrier no longer shows as switched off after a reload, and the Payments tab stays where it is while you change whether payment is required at checkout. Under the order button a buyer now reads what actually happens to their money, with its own line for cash on delivery. https://layerflow3d.com/changelog/#v1.64.3 layerflow3d-release-1.64.3 Wed, 16 Sep 2026 00:00:00 GMT Orders from other platforms. Upload an order export from Etsy or any CSV file, confirm the columns once, see what the import would do, and the orders land in your queue. A new SKU directory in your account maps a platform's codes to your print models, and orders waiting on a code settle themselves the moment you map it. Your shop page. Buyers can now pay at the branch with cash on delivery through Nova Poshta. The page carries your seller details for buyers in the EU: tax number, registered address, terms of sale and the right to withdraw. You can look at your own page while it is still closed, and copy a link to any item for a post or a story. On a wide screen the buy buttons fit the page, and the bar that follows a buyer on a phone offers the basket as well. Free tools and guides. The print cost, filament cost and printer hourly rate calculators have pages of their own, five guides for print shops are published, two of them also in Ukrainian and Russian, and there are comparison pages with Printago, SimplyPrint and spreadsheets. Testimonials. After twenty orders the workspace invites you to write a short testimonial about LayerFlow3D. A published one earns fifty paid orders on top of what your plan allows. A status page at layerflow3d.com/status shows whether every part of the service is working, checked every minute. The Terms of Use and the Privacy Policy now describe the service as it is today, your shop page and your buyers included. https://layerflow3d.com/changelog/#v1.60.0 layerflow3d-release-1.60.0 Mon, 14 Sep 2026 00:00:00 GMT Your storefront now does more to earn a buyer's trust. Under the order button, buyers see what happens to their money: nothing to pay now, or the card is entered on the payment provider's secure page and the shop never sees it. Once a shop has ten completed orders, the storefront header shows how many. In the storefront settings you can now add your exchange and returns terms, shown on every item page, and who sells: your legal name and city, shown at the bottom of the storefront. https://layerflow3d.com/changelog/#v1.57.3 layerflow3d-release-1.57.3 Sun, 13 Sep 2026 00:00:00 GMT The client list now finds people by phone. Type a number the way you have it written down and the card comes up, whichever way the number was typed into it in the first place. When a client card cannot be saved because another client already has that email address, the app now says so instead of "could not save". A client's row shows both where their parcels go and the note you typed beside it, so "leave it with the neighbour" is no longer hidden behind the branch address. The list of a client's orders now shows each order number, so you can tell which order you are looking at. Save in the client form stays off until something actually changes. The dashboard no longer loses a job from "Completed today" the moment you ship it. What was finished today stays counted for the rest of the day. "Needs attention" now lists unpaid deliveries by what is still owed, so the one worth the phone call is at the top. An order that is nearly paid off no longer outranks one that is not paid at all. The payment shares on the money card add up to a hundred per cent. https://layerflow3d.com/changelog/#v1.57.0 layerflow3d-release-1.57.0 Sat, 12 Sep 2026 00:00:00 GMT A shop that asks buyers for a full postal address can take orders again. The form now carries every part of the address, in the order an address is read, and the order button says what is missing instead of answering nothing. The storefront tells a buyer what is about to happen. Delivery that is already in the price says so instead of reading as free, a buyer who will be sent to a payment page is told before they order, and a carrier directory that does not answer says so instead of spinning. A product photograph now stays inside its frame on a phone, and a link to your shop shows your own picture when it is shared. Payments land where they should. A shop that connected two payment services no longer loses the payments of one of them, and money that arrives for an order that was already cancelled is no longer written down as received. In the workshop: what you type in the storefront settings is not taken back when something else saves, the switch for taking payment at checkout shows its real state, and the way an order is delivered is written on its card in your own language. Integrations now show only the delivery services you can actually use, and EasyPost and Sendcloud can be set up to the end. https://layerflow3d.com/changelog/#v1.55.0 layerflow3d-release-1.55.0 Fri, 11 Sep 2026 00:00:00 GMT Spool labels: print a label with a QR code for any spool or sealed box, on a label printer in 50×30, 40×30, 30×20 or 20×30, or as stickers on an A4 sheet. A phone camera opens the spool from its code, and a box's code opens a spool from that box. A spool can now have a place, such as a shelf or a box, and the warehouse search finds it by that place or by the code on its label. A spool that is finished or spoiled can be written off from its page in one step. A spool without an RFID tag can now be linked to its AMS slot by hand: press the link icon on the slot and pick the spool from your warehouse. It stays linked until you take it out of the slot. https://layerflow3d.com/changelog/#v1.53.0 layerflow3d-release-1.53.0 Fri, 11 Sep 2026 00:00:00 GMT LayerFlow3D now has a Help page with step-by-step guides for beginners: where to go, what to press and why. Open it from your profile menu, or from the question mark on any page, which now lists the guides that start there. It opens with the six steps a new workshop takes in order, from adding a printer to the first order. When you reach a limit of your plan, the message now says which limit it is and how high, instead of a plain error. Buttons you are not allowed to use are no longer shown, so nobody presses one only to get an error. Also fixed: linking a spool in an AMS Lite no longer marks it as full, Set it up for the telemetry agent opens the Agent tab, a stock-take chooses Found extra when you counted more than recorded, and a printer with live status switched off no longer keeps its address. https://layerflow3d.com/changelog/#v1.52.1 layerflow3d-release-1.52.1 Fri, 11 Sep 2026 00:00:00 GMT The storefront address field now checks as you type whether another shop already holds that address, and says so right under the field instead of after you press Save. On the phone, the Workspaces row in the profile menu opens with one tap. https://layerflow3d.com/changelog/#v1.52.0 layerflow3d-release-1.52.0 Fri, 11 Sep 2026 00:00:00 GMT The filament warehouse now keeps the purchase price with each delivery. When you receive stock or add spools that were already open, you type the price per kg for that line, prefilled from the filament type. Two deliveries of the same filament at different prices stay as separate batches, a spool opened from a batch carries the price of that batch, and the material cost of an order is priced by the very spools it will draw from. Spools you were already using before LayerFlow3D can be added straight into work with roughly how much is left on them, with quick picks of 25, 50 and 75 percent. Both stock dialogs send the whole form as one request, so a failed save leaves nothing half added. The button that adds a line moved under the cards, the header buttons share the row evenly on the phone, and the colour swatch in the filament list no longer squashes beside a long name. https://layerflow3d.com/changelog/#v1.49.0 layerflow3d-release-1.49.0 Thu, 10 Sep 2026 00:00:00 GMT When you create a workspace you now choose its country, and the app offers the carriers and services that work there: Nova Poshta is shown to workspaces in Ukraine. You can change the country in the workspace profile. The collapsed sidebar now shows every page as one even column of icons. https://layerflow3d.com/changelog/#v1.48.0 layerflow3d-release-1.48.0 Thu, 10 Sep 2026 00:00:00 GMT Track parcels from one page. A new Track item under Orders lists every waybill you have created: whose parcel it is, where it is going and what the carrier said last. Refresh all asks the carrier about every parcel still on its way, and one row can be refreshed, printed or opened as its order. The waybill number opens the carrier's own tracking page. On iPhone the app no longer zooms in when you tap a field. https://layerflow3d.com/changelog/#v1.47.1 layerflow3d-release-1.47.1 Wed, 09 Sep 2026 00:00:00 GMT A workshop can now be priced in any European currency or in Canadian dollars: twenty-two currencies in all, each with its own symbol on every price, and a search box in the currency picker so the right one is a few letters away. https://layerflow3d.com/changelog/#v1.46.1 layerflow3d-release-1.46.1 Wed, 09 Sep 2026 00:00:00 GMT Orders, stock and money now add up on every path. A sale from stock can be edited again while it waits, and its lines are what it sells. An order still waiting can be cancelled or renamed even when the shelf has run out of its material. Bought parts stay whole on the order that uses them, scrap is carried by the pieces that came out well, and a started job keeps its parts and material at the prices of the day it started. A cancelled finished job spends its material and comes off the shelf again. Analytics count only finished jobs as takings, read scrap from cancellations, and show what actually left the spools. Storefront pre-orders now come with Pro. Base shows up to ten items, and every plan alerts you about storefront orders. https://layerflow3d.com/changelog/2/#v1.43.1 layerflow3d-release-1.43.1 Tue, 08 Sep 2026 00:00:00 GMT The storefront has its own page in the menu, above the workspace, for the owner and the manager alike. It opens with the door and the address - the switch, the link to copy or open, and a QR code with your logo for packaging, parcel slips and a stand at a fair. Under it, the last thirty days in numbers: items shown, orders, orders waiting for you with the units they hold, and visitors with the share that ordered. A shop that has not opened yet sees three steps instead. Then the items in the order buyers see them, moved by hand or by arrows, and the page and delivery settings under their own tabs. Selling a model now happens in one place, the product card, opened by the tag button on any model. It holds the name and description the buyer sees, the price, whether the model is on the storefront, pre-orders, and the framing of the photograph, which the storefront shows exactly as you framed it. The card image for a feed or a story starts as the photograph alone; switch on the name, the shop, the colours, the facts or the price as you like. The model itself stays what it always was: plates, filament, files and production notes. https://layerflow3d.com/changelog/2/#v1.38.8 layerflow3d-release-1.38.8 Mon, 07 Sep 2026 00:00:00 GMT More room for a team on the paid plans: the Base plan now comes with 5 seats instead of 2, and the Pro plan with 15 instead of 6. Nothing to do on your side: the new limits apply to every workspace from today, and any invitation that was refused for lack of a seat can be sent again. When a buyer picks a Nova Poshta branch in the storefront order form, the list now says how much a parcel locker or a branch will take, for example up to 30 kg, so a heavy order is not sent to a locker that will refuse it. For Creality printers with a CFS: a spool without a Creality tag no longer links to every slot at once. Linking such a spool to one slot used to show it on all four, because the printer reports the same placeholder for every untagged spool. Slots without a tag now show no link, and a spool with a Creality tag links exactly as before. https://layerflow3d.com/changelog/2/#v1.38.2 layerflow3d-release-1.38.2 Mon, 07 Sep 2026 00:00:00 GMT Your workshop now has a storefront: a public page at layerflow3d.com/s/your-name that you can put in a social media bio. Buyers see the models you switched on, with prices and how many are on the shelf, pick a colour and a way of delivery, and the order lands in your queue as a new order. Units from the shelf stay reserved until you start the order, and a cancelled order simply frees them. A model with an empty shelf can be sold to order and is printed for the buyer. Set it up in Workspace, on the new Storefront tab: the address, a logo, a description, a contact and how to pay, delivery by Nova Poshta, by courier or by pickup, and links to your Instagram, Telegram, Threads or X for the page footer. Each model gets a storefront switch and a price in its edit dialog. The Free plan shows up to six items; paid plans show everything and take pre-orders. Selling from stock by hand has a new "already handed over" switch. Off, the order waits in the queue with its units reserved until you start it. https://layerflow3d.com/changelog/2/#v1.37.1 layerflow3d-release-1.37.1 Sun, 06 Sep 2026 00:00:00 GMT Creality printers with a K2 are now read correctly while they print. Such a machine used to show as free to take work even with a job halfway through, and its heaters looked switched off. Progress, temperatures, remaining time and the spools in its box now read the way the machine reports them. The box of filament is called what your machine calls it: AMS on a Bambu, CFS on a Creality. It reads that way on the printer card, on the dashboard tile and in the hints beside humidity and temperature. The weight, print time and total on an order card now sit on one line instead of the total dropping to a row of its own. https://layerflow3d.com/changelog/2/#v1.36.3 layerflow3d-release-1.36.3 Sun, 06 Sep 2026 00:00:00 GMT LayerFlow3D now reads Creality printers on your network. A K1, K2, Ender 3 V3 or Hi shows its temperatures, print progress, layer count and the spools loaded in its CFS box, the same way the machines we already supported do. Nothing to install on the printer and no cloud account: it needs the address and nothing else. Registering a printer got shorter. The form asks each brand only for what its machines actually have, so a Creality asks for the address alone while a Bambu still asks for its access code. A machine running something other than its stock firmware is recognised too: name that firmware in the model, and the fields it needs appear. If somebody has given you a key for a paid plan, there is now a place to enter it: open the profile menu and pick Activate a key. The plan turns on straight away, for as long as the key carries. https://layerflow3d.com/changelog/2/#v1.33.0 layerflow3d-release-1.33.0 Sat, 05 Sep 2026 00:00:00 GMT Nova Poshta is now part of the app. Connect it once in Settings, Integrations, with the key from your own Nova Poshta business cabinet, and a waybill button appears in every order. The app fills in what it already knows: the recipient and the branch from the customer card, the weight from the order. You add the size of the packed box and press one button. The number comes back with a ready message for the customer, and from the same place you can print the waybill, check where the parcel is, and cancel it while it has not been handed over. A customer card now remembers the city and the branch that person collects from, so the next order asks for nothing. Integrations live in one place now. File storage moved there too. The integration is free on every plan. https://layerflow3d.com/changelog/2/#v1.32.0 layerflow3d-release-1.32.0 Sat, 05 Sep 2026 00:00:00 GMT You can now run more than one workshop from a single account. Each workspace keeps its own printers, stock, orders and team, and the people you invite see only the one they were invited to. Your subscription covers all of them, so a new workspace opens on the plan you already pay for. Pro includes three workspaces, Ultimate ten. Create one in Settings, on the Workspace profile tab. Switch between them there or from the menu under your name, where the other workshops unfold under Workspaces. Switching moves your whole session, including the tabs you left open. Registering a printer no longer stops at five brands. Pick Other at the end of the manufacturer list and type the name, and it joins the list for good. The registration form also stopped letting the browser fill it in for you. Some fields were being read as a login form, which is how a saved address or password could land in a printer's IP or access code. https://layerflow3d.com/changelog/2/#v1.30.13 layerflow3d-release-1.30.13 Fri, 04 Sep 2026 00:00:00 GMT Thank you for printing with LayerFlow3D. This release carries no new feature, only a wish: may your beds stay level, your spools run out exactly when the last part is done, and your customers come back for more. We are here every day, making the app a little better for your workshop. Happy printing! https://layerflow3d.com/changelog/2/#v1.30.11 layerflow3d-release-1.30.11 Fri, 04 Sep 2026 00:00:00 GMT A print model can now be laid out in more than one way. Alongside the full plate, you can add a second plate sliced for a smaller quantity, with its own print time, filament and per-machine figures. An order for exactly that many then prints exactly that many, instead of a full bed with the rest going to the shelf. The model form itself is now three short tabs instead of one long page. When a model has several plates, the order form asks which one to print. The plan is shown under the quantity: how many runs, how many pieces, and how many go to stock. The order keeps that plan, so a plate you re-slice later never changes what an earlier order printed. Print time, filament and machine figures now live on the plate rather than on the model. Existing models were moved over as a single plate carrying what they had, and existing orders keep the plan they were made with. https://layerflow3d.com/changelog/2/#v1.29.0 layerflow3d-release-1.29.0 Thu, 03 Sep 2026 00:00:00 GMT Print model files can now live in your own Google Drive instead of ours. You connect the account once in Workspace, then pick or upload a file in Google own window - it never passes through us, and we keep only its name and a link to open it. Removing a file here leaves it exactly where it is in your cloud. Файли моделей друку тепер можуть жити у вашому власному Google Диску, а не в нашому. Акаунт підключається один раз у Робочому просторі, далі ви обираєте або завантажуєте файл у вікні самого Google - через нас він не проходить, ми зберігаємо лише назву та посилання, щоб його відкрити. Якщо прибрати файл тут, у вашій хмарі він залишиться на місці. https://layerflow3d.com/changelog/2/#v1.28.0 layerflow3d-release-1.28.0 Wed, 02 Sep 2026 00:00:00 GMT Every print model now names the machine it is normally printed on, and picking that machine opens its own card of numbers straight away. A model with no numbers for a machine cannot take an order for it, so the two steps are one step now. A machine's filament boxes can be left empty. An empty box means the model's own weight, so a machine only needs the figures that really differ from the recipe, and a card opened while you are still filling the model in keeps the print time you type above it until you measure that machine yourself. The card also reads better: the machine's time on one side, what it spends on the other, one line per filament. https://layerflow3d.com/changelog/2/#v1.27.0 layerflow3d-release-1.27.0 Wed, 02 Sep 2026 00:00:00 GMT The dashboard's top row now carries six figures instead of four: what is waiting to go out and what customers still owe have joined the queue, production, finished today and low filament. Each still opens the page it counts. A batch printed for the warehouse never appears as waiting to go out. It is closed the moment it is printed, and nobody ships it. On a phone, the printers widget no longer prints its title over the agent's status. https://layerflow3d.com/changelog/2/#v1.26.5 layerflow3d-release-1.26.5 Wed, 02 Sep 2026 00:00:00 GMT A batch printed for the warehouse no longer shows a payment state or a price in History and Archive: it is stock, not a sale. The change-status button is now on every card that can still move, including those in Shipped, and its menu also offers Closed for a shipped order. The menu is tighter and coloured by what each action does. A card put in Closed stays there instead of jumping back, and orders whose spool was later deleted can be moved on the board again. A printer that briefly dropped off Wi-Fi no longer needs the telemetry agent restarted to be seen again: the agent now closes every probe connection it opens, so the machine keeps accepting it. https://layerflow3d.com/changelog/2/#v1.26.2 layerflow3d-release-1.26.2 Wed, 02 Sep 2026 00:00:00 GMT Moving an order on from Ready to ship no longer fails with "not enough open filament". The filament is taken from the shelf once, when the job starts printing; finishing, shipping and marking it paid now leave the shelf alone. A batch printed for the warehouse reads Closed in History and Archive once it is done, the same as on the board. It never counted as revenue, and still does not. Switching to a smaller plan now asks first and says what the plan allows, so a single click can no longer move a workspace to Free. Where payments are not switched on yet, plan buttons are disabled altogether. The board's horizontal scrollbar is visible again, so the Closed and Cancelled columns can be reached with a mouse, not only by swiping a trackpad. https://layerflow3d.com/changelog/2/#v1.26.1 layerflow3d-release-1.26.1 Wed, 02 Sep 2026 00:00:00 GMT On iPhone, pages now scroll fully clear of the floating bottom bar. The last card of a list and the end of the order form used to stop underneath it, so the bottom of the page could not be read or tapped. The order form now keeps the price you type. The Analytics card is now the Final price card: it shows the workshop cost, the printing at its markup and the bought parts at their price, and the final price is a field you can type into. Whatever you type is kept exactly as typed, with a one-line way back to the formula. It used to be turned into a markup and back, and on bigger jobs a typed 300 came back as 299.99. The Cost & pricing section is now called Print price and holds only the formula's inputs. The filament the whole order takes now sits under the machine row of Production details instead of a card of its own. On a phone, drop-down lists no longer run past the edge of the screen; a long option folds onto a second line instead. https://layerflow3d.com/changelog/2/#v1.24.0 layerflow3d-release-1.24.0 Wed, 02 Sep 2026 00:00:00 GMT The phone's bottom navigation is now a floating capsule with a new set of icons drawn for it: one line weight, one size, and the section you are in shown as a solid shape instead of a colour change. The dashboard is a house now, on the phone and in the sidebar. Printer tiles on the dashboard line up again: a machine with no telemetry keeps its AMS row on the same line as its neighbours. https://layerflow3d.com/changelog/2/#v1.23.0 layerflow3d-release-1.23.0 Tue, 01 Sep 2026 00:00:00 GMT The filament colour dot across the app is now a flat spool: the colour is the winding and the hole in the middle is the hub. It looks the same in AMS trays, warehouse tables, spool cards and colour pickers, and white and black filament are easier to tell apart. An AMS Lite slot now shows how much filament is left when the spool in it is linked to a warehouse spool. The AMS Lite has no scale, so the figure comes from your stock records rather than from a weighing, and the slot says so on hover. A slot linked to nothing still shows no figure. https://layerflow3d.com/changelog/2/#v1.22.7 layerflow3d-release-1.22.7 Mon, 31 Aug 2026 00:00:00 GMT Search the whole workspace from one box. Press Cmd+K, or Ctrl+K on Windows, and start typing. Orders, clients, printers, print models, spools and supplies all answer to the same search. Choose a result and the app opens it with the list already filtered. Order History and the Order Archive now search everything you have, not only the page in front of you. Before this, a search looked at the twenty five rows that happened to be loaded, so a customer whose orders sat further back appeared to have none at all. The status and payment filters work across the whole list in the same way, the count above the table is the real number of matches, and paging through a filtered list keeps the filter. https://layerflow3d.com/changelog/2/#v1.22.0 layerflow3d-release-1.22.0 Mon, 31 Aug 2026 00:00:00 GMT The dashboard now opens with your printers across the top: every machine as the same tile, showing its photo, temperatures, how far the print has got and when it comes off. Under them a new Needs attention panel collects what is waiting on you: orders left sitting in the queue, jobs delivered but not paid for, machines that are off and spools down to their last grams. Money this month now draws the last two weeks as a line, revenue and profit together, with how the week compares to the one before it, and beside it you can see how much of that fortnight your machines actually spent printing and which customers and models brought in the most. A few figures were also corrected: a spool's remaining percentage is measured against the weight it was bought at, the stock and queue totals count your whole workshop rather than the rows on screen, and takings count towards the month the job was finished in. https://layerflow3d.com/changelog/2/#v1.17.7 layerflow3d-release-1.17.7 Sat, 29 Aug 2026 00:00:00 GMT The AMS unit on a printer's page now says which one it is - AMS Lite or AMS 2 Pro - instead of an internal unit number. https://layerflow3d.com/changelog/3/#v1.17.6 layerflow3d-release-1.17.6 Sat, 29 Aug 2026 00:00:00 GMT A printer running its own calibration is no longer shown as printing. It says it is calibrating, and tells you when it will be free, instead of reporting progress through a job nobody ordered. https://layerflow3d.com/changelog/3/#v1.17.0 layerflow3d-release-1.17.0 Sat, 29 Aug 2026 00:00:00 GMT The warehouse can now be counted. Every shelf - opened spools, sealed batches, bought parts and finished pieces - has a stock-take button on each row: type what is actually there, say why it differs, and the books are corrected to match. Every correction is kept: what it was, what it became, what the difference was worth, who made it and why. So the question "how much did we quietly lose last month, and to what" now has an answer. Addresses inside a notification are links again. One that leads into the app opens the page directly, and one that leads outside opens in a new tab. https://layerflow3d.com/changelog/3/#v1.16.0 layerflow3d-release-1.16.0 Sat, 29 Aug 2026 00:00:00 GMT Printers now show when a print will finish, not only how long is left. The finish time appears on the printer page, on every printer card and in the fleet widget. If the tray feeding a print holds less filament than the order needs, the printer page says so, and the order form shows what is in stock next to what each run will use. Neither one stops you from printing. Bambu H2 printers list every hotend on the rack with the hours printed on each, so replacing a worn nozzle is a decision based on a number. The printer page also shows what the machine watches its own print for, the drying settings on each loaded spool, and where the current job came from. Printer status lines now follow the language you use the app in. https://layerflow3d.com/changelog/3/#v1.15.0 layerflow3d-release-1.15.0 Sat, 29 Aug 2026 00:00:00 GMT Your printers now tell you when they stop. When a machine reports a fault - a jam, a filament runout, an AMS that lost its connection - a notification reaches your phone and a message appears on screen, wherever you are in the app. Each fault comes with the manufacturer's own explanation of what went wrong, in your language where they publish one, so you can tell what needs you right now from what can wait. Faults are written to the activity log too, so a week later you can still see when a machine started playing up. https://layerflow3d.com/changelog/3/#v1.12.1 layerflow3d-release-1.12.1 Fri, 28 Aug 2026 00:00:00 GMT Sign-up now asks which currency your shop works in, and every price field starts on a figure that makes sense for it. A printer card shows the hourly rate your orders are actually charged: when you fill in what the machine cost and how long it will last, that is the number everywhere. Print time on an order is typed as hours and minutes, the way your slicer reports it. A shop with a single printer gets it filled in automatically, and a finished order lands on the board. Sign-in and sign-up now offer the language switcher, and an order with no open spools says so instead of showing an empty list. https://layerflow3d.com/changelog/3/#v1.12.0 layerflow3d-release-1.12.0 Fri, 28 Aug 2026 00:00:00 GMT Every order now has a real number — №1000 and counting — on its card, on the dashboard, and in the payment message below. The Company page keeps your payment details: bank requisites, an amount line and a payment purpose. One click on an order card turns them into a clean message with the order number and total filled in — you see exactly what will be sent, copied on a desktop or shared straight to a messenger on a phone. Print time is now entered as hours and minutes, the way slicers report it — in the price calculator and on print models. The night electricity tariff is yours to tune: set what a night kilowatt costs and the hours it applies, on the Company page. The calculator prices overnight prints with it. https://layerflow3d.com/changelog/3/#v1.7.0 layerflow3d-release-1.7.0 Thu, 27 Aug 2026 00:00:00 GMT Two things that used to be typed by hand now fill themselves in. **A print model can read its own sliced file.** Open a .gcode or a .gcode.3mf from your slicer and the form takes the print time and the exact grams of every filament straight out of it, matching them against the spools you actually stock. An unsliced project gives up its rendered plate as the model's picture. The file is read in your browser and nothing is uploaded or kept. **Your phone can tell you when a print finishes.** Open the bell and turn on "Tell me on this device": a finished print, a filament running low or a part running out reaches you with the tab closed and the laptop asleep. Each device decides for itself, and you can turn it off in the same place. https://layerflow3d.com/changelog/3/#v1.5.0 layerflow3d-release-1.5.0 Thu, 27 Aug 2026 00:00:00 GMT Working from your phone just got roomier: every dashboard card now opens full screen. Tap the expand icon next to a card's header and the price calculator, your printer fleet, or any other widget takes the whole display — handy when you are standing right next to the machine. The price calculator also learned about night electricity: set the hour a print starts, and the hours that fall into the 23:00–07:00 window are billed at half the day rate. Overnight prints finally cost what they actually cost. https://layerflow3d.com/changelog/3/#v1.1.0 layerflow3d-release-1.1.0 Wed, 26 Aug 2026 00:00:00 GMT Everything in this release is about the first day in a new workspace. The dashboard's empty cards now carry the button each of them talks about, so a fresh account can add its first printer, order, filament or print model straight from the front page instead of reading four descriptions of what is missing. Four fixes to go with it. The filament page used to sit on loading placeholders forever while the warehouse was still empty, never reaching the note that explains how to stock it. The printers page warned that "these printers" could not report temperature before a single printer had been added. Analytics printed some figures as $0 and others as $0.00 in the same row. And using your one included seat on the Free plan coloured the usage bar red, as if something had gone wrong, when nothing had - a full bar is amber now, and red is kept for actually being over a limit. https://layerflow3d.com/changelog/3/#v1.0.7 layerflow3d-release-1.0.7 Wed, 26 Aug 2026 00:00:00 GMT Warehouse stock is now counted per colour. Every print model keeps a separate pile for each colourway, so a red dragon and a white dragon no longer share one number - producing to stock and selling from stock both ask which colour they touch. The filament page grew a brand filter next to the type filter, and both now take several picks at once. The registry of filament types moved out of its tab into its own window, opened from the button next to "New type", so the stock table gets the whole page. A consistency pass across the app: an order status wears the same colour on every screen, money always shows two decimals with thousands separators, long print times read as hours and minutes instead of "931 min", and a printer that stops reporting now says "No signal" instead of connecting forever. The printer page leads with what the machine is doing right now; the machine's passport moved below it.